|
|
Chemical Storage Plan for Laboratories
- Chemicals should be stored according to hazard class (ex.
flammables, oxidizers, health hazards/toxins, corrosives,
etc.).
- Store chemicals away from direct sunlight or localized
heat.
- All chemical containers should be properly labeled, dated
upon receipt, and dated upon opening.
- Store hazardous chemicals below shoulder height of the
shortest person working in the lab.
- Shelves should be painted or covered with chemical-resistant
paint or chemical-resistant coating.
- Shelves should be secure and strong enough to hold chemicals
being stored on them. Do not overload shelves.
- Personnel should be aware of the hazards associated with
all hazardous materials.
- Separate solids from liquids.
|
Below are examples of chemical groups that can be used
to categorize storage. Use these groups as examples when
separating chemicals for compatibility. Please note: reactive
chemicals must be more closely analyzed since they have
a greater potential for violent reactions. Contact Laboratory
Safety if you have any questions concerning chemical storage.
|
Acids
- Make sure that all acids are stored by compatibility
(ex. separate inorganics from organics).
- Store concentrated acids on lower shelves in chemical-resistant
trays or in a corrosives cabinet. This will temporarily
contain spills or leaks and protect shelving from residue.
- Separate acids from incompatible materials such as bases,
active metals (ex. sodium, magnesium, potassium) and from
chemicals which can generate toxic gases when combined
(ex. sodium cyanide and iron sulfide).
Bases
- Store bases away from acids.
- Store concentrated bases on lower shelves in chemical-resistant
trays or in a corrosives cabinet. This will temporarily
contain spills or leaks and protect shelving from residue.
Flammables
- Approved flammable storage cabinets should be used for
flammable liquid storage.
- You may store 20 gallons of flammable liquids per 100
sq.ft. in a properly fire separated lab. The maximum allowable
quantity for flammable liquid storage in any size lab
is not to exceed 120 gallons.
- You may store up to 10 gallons of flammable liquids
outside of approved flammable storage cabinets.
- An additional 25 gallons may be stored outside of an
approved storage cabinet if it is stored in approved safety
cans not to exceed 2 gallons in size.
- Use only explosion-proof or intrinsically safe refrigerators
and freezers for storing flammable liquids.
- University of Georgia guidelines for flammable storage
follow NFPA 30, 45 and the UGA Chemical & Laboratory
Safety Manual.
Peroxide-Forming Chemicals
- Peroxide-forming chemicals should be stored in airtight
containers in a dark, cool, and dry place.
- Unstable chemicals such as peroxide-formers must always
be labeled with date received, date opened, and disposal/expiration
date.
- Peroxide-forming chemicals should be properly disposed
of before the date of expected peroxide formation (typically
6-12 months after opening).
- Suspicion of peroxide contamination should be immediately
investigated. Contact Laboratory Safety for procedures.
Water-Reactive Chemicals
- Water reactive chemicals should be stored in a cool,
dry place.
- Do not store water reactive chemicals under sinks or
near water baths.
- Class D fire extinguishers for the specific water reactive
chemical being stored should be made available.
Oxidizers
- Make sure that all oxidizers are stored by compatibility.
- Store oxidizers away from flammables, combustibles,
and reducing agents.
Toxins
- Toxic compounds should be stored according to the nature
of the chemical, with appropriate security employed when
necessary.
- A "Poison Control Network" telephone number
should be posted in the laboratory where toxins are stored.
(800-282-5846 throughout Georgia)
|
Color coded labeling systems that may be found in your
lab:
| Hazard |
Color
Code |
| Flammables |
Red |
| Health Hazards/Toxins |
Blue |
| Reactives/Oxidizers |
Yellow |
| Contact Hazards |
White |
| General
Storage |
Gray,
Green,
Orange |
Please Note: Chemicals with labels that are colored and
striped may react with other chemicals in the same hazard
class. See MSDS for more information. Chemical containers
which are not color coded should have hazard information
on the label. Read the label carefully and store accordingly.
|
|
|